Nipros ES-500P System Connection Manual User Manual download pdf

Adjusts the audio level of INTERCOM HEADSET

DL-400 connected to HEADSET connector

(XLR 4-pin) on the connector panel.

-1. Adjusts the microphone volume level.

-2. Adjusts the headphone volume level.

-3. Adjusts the SIDETONE volume level to hear

your own voice properly.

INTERCOM HEADSET

MIC volume,

H.P volume and

SIDE TONE volume

TALLY indicator

Lights up when receiving

the tally signal from ES-600P.

PEAK indicator

Lights on when the input signal

to AUDIO IN connector is over

level even momentarily.

METER SELECT switch

Selects the Meter mode,

VU mode or PEAK mode.

METER LIGHT switch

Turns on or off the light of

the VU/PEAK meter.

VU/PEAK meter

Used to confirm the input signal

level to AUDIO IN connector.

METER SELECT switch selects

VU or PEAK mode.

VU(VU meter) : from -20dB

to +3dB

(indicated in upper scale)

PK(PEAK program meter) :

from -60dB to 0dB

(indicated in lower scale)

The rated level of the output

signal of ES-600P is - 20dBm

when VU meter indicates 0dB

or PEAK meter indicates -20dB.

TALK ON/OFF switch

Turns on/off the microphone

of the intercom headset.

MONITOR SELECT switch

LIMIT switch

LEVEL volume

Turns on/off the Hyper Limiter.

When set to ON position, the limiter works up

to +30dB to prevent the distortion of the audio

output to ES-600P.

Adjusts the audio input level from a camcorder.

INPUT LEVEL switch

Select the appropriate position according to

the input level connected to the AUDIO IN

connector on the connector panel.

+4dB : When a line-level (+4 dBm)

signal source is connected.

-20dB : When a line-level (-20 dBm)

signal source is connected.

-60dB : When a microphone (-60dBm)

is connected.

In case of using a codenser

microphone, set the P-MIC

switch to the 48V position.

POWER switch

Turns the power on and off.

(main panel)

Select the INTERCOM or the AUDIO IN position

to monitor the audio signal on INTERCOM line

or the audio signal to AUDIO IN connector by

the headset connected to HEADSET connector

on the connector panel.

P-MIC switch

When using a phantom 48V condenser microphone,

set to the 48V position to supply +48V DC power

to the microphone and select the -60dB position

of the INPUT LEVEL select switch.

INTERCOM

MIC

H.P

ES-500

CAMERA ADAPTER

MIN

MAX

MIN

MAX

POWER

OFF

+4dB

-20dB

-60dB

48V

OFF

P-MIC

METER

SELECT

HYPER LIMITER

TALLY

PEAK

MONITOR

SELECT

INTERCOM

AUDIO IN

MIN

MAX

OFF

LIMIT

LEVEL

INPUT LEVEL

AUDIO INPUT

METER

LIGHT

OFF

TALK

OFF

SIDE

TONE

For using ES-500P/ES-600P.

ES-500P Outsideview / Parts Names and Functions (Main panel)

Operating

Instructions

ES-500P/ES-600P incorporates the REMOTE connector

according to the Panasonic camera remote cotroller.

ES-500P/ES-600P : for Panasonic camera

ES-500P

Camera Adaptor

NOTICE : ES-500P and ES-600P do not convert the media or format of the input signals to annother.

1 2 3 4 5 6

Summary of Contents

Page 1 - Instructions

Adjusts the audio level of INTERCOM HEADSETDL-400 connected to HEADSET connector (XLR 4-pin) on the connector panel.-1. Adjusts the microphone volume

Page 2 - (VIDEO OUT/TC IN)

Y IN/Pb IN/Pr IN connectors (BNC×3)RET OUT connector (BNC)TALLY OUT connector (BNC)Connect the HD/SD analog componentsignals(Y/ Pb(B-Y)/ Pr(R-Y)) from

Page 3

ES-600PBase Station1-1. Adjusts the volume level of input.-2. Adjusts the volume level of output.-3. Adjusts the volume level of SIDE TONE, return of

Page 4

(rear)Turns when POWER switch is on.Connect with the AC 85V-240V (50/60Hz)power supply.CAMERAAUDIO OUT EXT LINE (2W I/O) EXT LINE (2W I/O)HD/SD COMPON

Page 5 - ( )

System Connection Guide26-pin Multi-cable Studio System ES-500P/ES-600P(26-pin)DC POWERCONNECTOR PANELヘッドセットHEAD SETDL-400HD SDI OUTGENLOCKBNC CABLEHD

Page 6 - ES-500P/ES-600P

INTERCOM HEADSET(XLR 4-pin)DL-400H.PMICSIDETONEHEADSETVolume＜2-wire Intercom Line＞OUTINSIDETONEEXT LINE (4W I/O) VolumeEXT LINE (2W I/O)(XLR 3-pin 2